
We find voltage problems early to protect equipment, improve efficiency, and reduce electrical safety risks.
Power problems are not always easy to spot. You may notice lights flickering, breakers tripping, equipment running hot, motors acting strange, or electronics failing sooner than they should. Our power quality check helps find the cause of those issues before they turn into bigger safety risks, downtime, or expensive damage.
At Solid Ground Electric, we provide power quality testing for homes, commercial buildings, and industrial spaces in Auburn and the surrounding area. We look at how your electrical system is performing under real conditions. That includes checking for voltage fluctuations, low voltage, overvoltage, unbalanced loads, loose connections, harmonics, wiring issues, and other conditions that can affect safety, efficiency, and equipment life.
During a typical service visit, we start by learning what problems you have seen, such as dimming lights, nuisance breaker trips, sensitive equipment shutdowns, or utility-related concerns. Then we inspect key parts of the system, which may include the panel, grounding and bonding, branch circuits, feeders, transformers, disconnects, and connected equipment. When needed, we use testing equipment to measure voltage, current, load behavior, and circuit performance so we can identify hidden problems with better accuracy.
A power quality check can be especially useful if you have added new equipment, upgraded your panel, noticed rising energy costs, or operate devices that depend on stable power. Poor power quality can affect HVAC systems, appliances, computers, servers, production equipment, pumps, LED lighting, and retail or fuel system controls. In many cases, fixing the root issue can improve performance, reduce wear and tear, and help prevent future outages.
Once we finish testing, we explain what we found in plain language. If there is a problem, we will recommend practical solutions based on your system and your goals. That may involve load balancing, wiring corrections, grounding improvements, circuit upgrades, surge protection, panel work, or other electrical repairs. Our goal is to help you make smart decisions that protect your property and keep your electrical system running the way it should.
If you are dealing with unexplained electrical issues or want peace of mind about your system, we are ready to help. Contact Solid Ground Electric to schedule a power quality check and get clear answers from a team that stands behind its work.
We start by learning about flickering lights, nuisance breaker trips, overheating, or sensitive equipment problems, then schedule an on-site visit. Our electrician checks your panel, circuits, grounding, and connected loads to spot warning signs and plan the right power quality testing.
We perform targeted voltage and load testing to identify issues like voltage drop, imbalance, harmonics, loose connections, or overload conditions. If needed, we use monitoring over a set period to catch intermittent problems and give you a clear picture of what is affecting safety, efficiency, and equipment life.
Once testing is complete, we walk you through the findings in plain language and recommend practical next steps, such as panel upgrades, surge protection, circuit corrections, or equipment modifications. We stand behind our work and focus on fixes that improve reliability, protect your system, and leave you fully satisfied.
Common questions we hear from home and business owners in Auburn about voltage issues, equipment protection, and what to expect from a professional power quality inspection.
A power quality check is a professional test of your electrical system to find voltage drops, power surges, wiring issues, harmonics, and other problems that can damage equipment or cause unreliable performance. We use it to pinpoint the source of trouble and recommend the right fix.
You may need one if lights flicker, breakers trip often, equipment shuts off randomly, motors run hot, or electronics keep failing. These are common signs of voltage issues or electrical disturbances. We can test the system, explain what we find, and help you prevent bigger problems.
Yes. Poor power quality can shorten the life of HVAC systems, computers, appliances, machinery, LED lighting, and other sensitive equipment. Voltage swings and electrical noise can cause overheating, nuisance shutdowns, and expensive failures. Catching the issue early helps protect your investment and reduce downtime.
We inspect key parts of your electrical system, test voltage stability, and look for issues affecting safety, efficiency, and equipment performance. If needed, we use advanced diagnostic tools to track irregularities over time. Then we explain the findings clearly and recommend practical next steps.
Yes. We perform power quality testing for homeowners, commercial properties, and industrial sites in and around Auburn. Whether you are dealing with sensitive electronics at home or equipment problems at your business, we tailor the inspection to your system and your concerns.
We bring hands-on experience with residential, commercial, and industrial electrical systems across Auburn and nearby areas. Our licensed electricians focus on clear answers, quality workmanship, and real solutions that fit your property. If something is wrong, we will find it and help you fix it.
See what homeowners and businesses say about our clear work, fair service, and dependable results.
"Solid ground electric was great! I had a problem with my breaker that was heating up my water heater and he came by within an hour after contacting them. The problem was fixed in no time and he even took a look at my water heater to make sure that wasn’t the issue. Second time using Solid Ground and they will be my go to! Highly recommend."
"My water heater stopped working, I called two other companies I have used in the past 2 years. One of them came out and looked at the water heater, and said that they couldn't fix it until the electrical was fixed. Then they gave me an estimate of $4000. Then I called another company I used too use and their rates went up, they now charge $225 an hour with a minimum of two hours. Which means you're actually paying two hours even if it's only an hour of work. So I looked online and found Solid Ground Electric in Auburn. Matthew answered the phone, he came the same day too look at it. He looked at the water heater and the wires, and said it'll be about $500, which is very honest and reasonable. So he came out the next day too fix it and it wasn't the water heater at all, it was only the wiring and a bad connection. The other company wanted to fully replace my water heater, without even looking at it too see what the problem was and they wanted $4000. Matthew was very prompt and polite and honest. He fixed it the next day and he only charged me $554. I choose to give him an extra $50 for being so honest. Call Matthew if you want honesty and integrity, and good work done."
"Very reasonable rates and Matt is honest to a fault. I did not feel like I was being extorted for the work being done and he found ways to get the work done without adding on extra or unnecessary work that typically bigger companies do to make bank off of people. He also took the time to explain things when I asked questions and he seems to enjoy sharing knowledge of his profession! - Joshua Brisco"
"Matt communicated clearly, showed up on time and installed 5 ceiling light fixtures in approximately 2 hours with his colleague, Jeremy. I will use them again in the future for any electrical needs."
"We can’t recommend Matt with Solid Ground Electric enough. He has been our go-to electrician at Orting Manor, and every experience working with him has been exceptional. Matt is incredibly reliable, responsive, and detail-oriented. Whether it’s troubleshooting an issue quickly or helping us plan and execute electrical improvements for the venue, he consistently delivers high-quality work. As a wedding and event venue, having someone we can trust to keep everything running safely and smoothly is absolutely essential, and Matt gives us that peace of mind every time. Beyond his skill, he’s just a great person to work with, professional, honest, and truly invested in doing the job right. We’re so grateful to have him as part of our trusted vendor team and would highly recommend him to anyone in need of electrical work."
"Matt with solid ground electric great to work with. Very satisfied."
"Matt and his team are awesome. Always fair, quick and super friendly!"
"Matt with Solid Ground Electric is the best! We have worked with him on several occasions. He took on a job that another electrician had botched, fixed it, and made a few suggestions to improve it and save us some money. He's easy to work with and very trustworthy. Highly, highly recommend!"
"I selected Matt's team at Solid Ground Electric to install a level 2 EV charger in our garage. Matt's team offered a very reasonable quote, arrived on time, and did a great job installing. Matt also did an exceptional job with communicating to ensure I received a rebate via Seattle City Light for the installation. I was very pleased with the overall experience and will plan to work with Solid Ground Electric for future electric needs. A+, 10/10, 2 thumbs up!!"
"On time, quality work, timely install, communication on point, and fair pricing"
"I have called on Solid Ground Electric a few times. Every time they have come through. From service to installation. They are well trained and able to explain in understandable terms answers to your questions. Also great job wiring my security system. Thank you Matt."
"If I need an electrician, I'm calling Matt Small of Solid Ground Electric. He installed my level II EV charger. He had competitive prices and I know this important-for-safety job was done right because he's an IBEW electrician. He aims to please--he listens, he's on time, trustworthy and pleasant. He installed my charger and I'd trust him with any electrical application."
"Great service expert knowledge absolutely professional."
"I had a great experience with Solid Ground Electt. I would definitely recommend them, If you have need of electrical work."
"Outstanding experience with Matt on the repair and replacement of exhaust fan and heater in an older home - responsive, dependable, reasonable, good advice, thorough, neat, quick, personable, and clear communication as to cost without red tape, exclusions and extras. A+"
"They were prompt and courteous. They identified the issue and made the repairs. We have used them a couple times for our commercial property and have been pleased with the results."
"Used Solid Ground Electrical many times and have had great service and communication throughout the process."
"I've worked with Matt and his team at Solid Ground Electric a few times over the past 2 years. They have always been great to work with. Very clear communication before, during and after a project has been completed. I would highly recommend Solid Ground Electric and will not hesitate to use them for any upcoming projects we have. Great Company!"
"Matt and his team at Solid Ground Electric have been wonderful to work with. They met critical deadlines and worked with us in a tough scheduling environment. Their work was done professionally and with great care. We will not hesitate to work with Solid Ground again."
"Matt with Solid Ground Electric is the best! We have worked with him on several occasions, and he even took on a botched job from another electrician, not only fixing it but also making a few suggestions to improve it. Highly, highly recommended!"
"I chose Solid Ground Electric because my son, who is in the trades, recommended them. Matt helped me choose a level 2 car charger and installed it. He did a beautiful job and I absolutely trust his skill and knowledge. I'm happy to give solid Ground Electric a five star review."
"I had the pleasure of working with Solid Ground Electric. They produced a high-quality product in a very professional manner. I was especially impressed with the security and special wiring tasks that were completed with care. Thank you Matt."
"Matt and his team are amazing. Jobs small and large he has got you covered."
Stop hidden voltage problems now and protect your equipment, safety, and efficiency.