We document site conditions and updates clearly to help your operation stay organized, efficient, and compliant.
When you run an industrial site, bad or outdated field information can slow production, create safety risks, and cause problems during inspections. Our industrial field listing service gives you accurate on-site documentation and clear updates, so your facility stays organized, efficient, and compliant.
At Solid Ground Electric, we work in active industrial environments where details matter. We verify what is actually installed in the field, compare it to existing records, and document changes that may affect operations, maintenance, troubleshooting, or future upgrades. This service is especially helpful for facilities with older electrical systems, phased expansions, equipment replacements, or incomplete drawings.
Our field listing work can include identifying electrical equipment, confirming panel schedules, documenting disconnects and feeders, noting circuit routing, checking labels, and recording changes to distribution systems, controls, lighting, transformers, and connected equipment. We focus on producing clear, usable information that helps plant managers, maintenance teams, engineers, and inspectors work from the same page.
A complete field listing can support many needs across your operation, including:
We know industrial sites are rarely simple. Equipment changes over time, labels fade, and documentation can fall behind real-world conditions. That is why we take a practical, boots-on-the-ground approach. Our licensed electricians understand how electrical systems are built and how to document them in a way that is useful in the field, not just on paper.
Whether you need a one-time site verification or ongoing documentation updates as your facility changes, we can tailor the scope to your operation. We serve businesses in Auburn and throughout South King County and Pierce County, handling everything from smaller electrical updates to complex industrial work. If you need dependable industrial field listing backed by real electrical experience, we are ready to help you get your records current and your site better prepared for what comes next.
We keep industrial sites organized, current, and inspection-ready with a clear process built around accuracy, safety, and minimal disruption to your operation.
We start with a jobsite walkthrough to review equipment, panels, disconnects, feeders, and control systems, then compare field conditions to your existing prints and records. From there, we define the listing scope, identify code or labeling gaps, and set a realistic timeline around your production schedule.
Our electricians document each component in the field, verify nameplate data, trace circuits, and record any modifications that affect compliance, maintenance, or future service. We update labels, organize equipment details, and flag safety concerns clearly so your team has accurate, usable information right away.
Before we wrap up, we perform a final quality check to confirm the field listing matches actual site conditions and supports inspections, service work, and internal records. We then walk your team through the finished documentation, answer questions, and make sure you are fully satisfied with the result.
Common questions we hear from facility managers, contractors, and plant teams about on-site electrical documentation and field updates.
An industrial field listing is on-site documentation and verification for electrical equipment, systems, or changes made in the field. We help organize the details, update records, and confirm installations match code and project requirements so your operation stays clear, consistent, and ready for review.
You may need field listing services when equipment has been modified, relocated, custom-built, or installed without complete current documentation. It is also helpful during expansions, shutdowns, inspections, and upgrades when accurate electrical records can prevent delays, confusion, and costly rework.
Clear documentation helps your team troubleshoot faster, plan maintenance better, support inspections, and reduce mistakes during future work. It also gives managers, contractors, and maintenance staff a reliable record of what is actually installed in the field, not just what was originally planned.
Yes. We regularly work in complex commercial and industrial environments and understand how important safety, scheduling, and coordination are. We keep the process organized, communicate clearly, and work carefully to minimize disruption to your operation while gathering the information you need.
We are based in Auburn and serve businesses across South King County and Pierce County, including Federal Way, Tacoma, Puyallup, Sumner, Enumclaw, and Maple Valley. If your facility is nearby, there is a strong chance we can help with your industrial field listing needs.
We bring hands-on electrical experience, strong attention to detail, and a commitment to getting the job done right. Our team handles everything from complex industrial installations to specialty systems, and we stand behind our work. Contact us to schedule your field listing and keep your site organized.
See what local homeowners and businesses notice most reliable work, clear updates, and solid results
"Solid ground electric was great! I had a problem with my breaker that was heating up my water heater and he came by within an hour after contacting them. The problem was fixed in no time and he even took a look at my water heater to make sure that wasn’t the issue. Second time using Solid Ground and they will be my go to! Highly recommend."
"My water heater stopped working, I called two other companies I have used in the past 2 years. One of them came out and looked at the water heater, and said that they couldn't fix it until the electrical was fixed. Then they gave me an estimate of $4000. Then I called another company I used too use and their rates went up, they now charge $225 an hour with a minimum of two hours. Which means you're actually paying two hours even if it's only an hour of work. So I looked online and found Solid Ground Electric in Auburn. Matthew answered the phone, he came the same day too look at it. He looked at the water heater and the wires, and said it'll be about $500, which is very honest and reasonable. So he came out the next day too fix it and it wasn't the water heater at all, it was only the wiring and a bad connection. The other company wanted to fully replace my water heater, without even looking at it too see what the problem was and they wanted $4000. Matthew was very prompt and polite and honest. He fixed it the next day and he only charged me $554. I choose to give him an extra $50 for being so honest. Call Matthew if you want honesty and integrity, and good work done."
"Very reasonable rates and Matt is honest to a fault. I did not feel like I was being extorted for the work being done and he found ways to get the work done without adding on extra or unnecessary work that typically bigger companies do to make bank off of people. He also took the time to explain things when I asked questions and he seems to enjoy sharing knowledge of his profession! - Joshua Brisco"
"Matt communicated clearly, showed up on time and installed 5 ceiling light fixtures in approximately 2 hours with his colleague, Jeremy. I will use them again in the future for any electrical needs."
"We can’t recommend Matt with Solid Ground Electric enough. He has been our go-to electrician at Orting Manor, and every experience working with him has been exceptional. Matt is incredibly reliable, responsive, and detail-oriented. Whether it’s troubleshooting an issue quickly or helping us plan and execute electrical improvements for the venue, he consistently delivers high-quality work. As a wedding and event venue, having someone we can trust to keep everything running safely and smoothly is absolutely essential, and Matt gives us that peace of mind every time. Beyond his skill, he’s just a great person to work with, professional, honest, and truly invested in doing the job right. We’re so grateful to have him as part of our trusted vendor team and would highly recommend him to anyone in need of electrical work."
"Matt with solid ground electric great to work with. Very satisfied."
"Matt and his team are awesome. Always fair, quick and super friendly!"
"Matt with Solid Ground Electric is the best! We have worked with him on several occasions. He took on a job that another electrician had botched, fixed it, and made a few suggestions to improve it and save us some money. He's easy to work with and very trustworthy. Highly, highly recommend!"
"I selected Matt's team at Solid Ground Electric to install a level 2 EV charger in our garage. Matt's team offered a very reasonable quote, arrived on time, and did a great job installing. Matt also did an exceptional job with communicating to ensure I received a rebate via Seattle City Light for the installation. I was very pleased with the overall experience and will plan to work with Solid Ground Electric for future electric needs. A+, 10/10, 2 thumbs up!!"
"On time, quality work, timely install, communication on point, and fair pricing"
"I have called on Solid Ground Electric a few times. Every time they have come through. From service to installation. They are well trained and able to explain in understandable terms answers to your questions. Also great job wiring my security system. Thank you Matt."
"If I need an electrician, I'm calling Matt Small of Solid Ground Electric. He installed my level II EV charger. He had competitive prices and I know this important-for-safety job was done right because he's an IBEW electrician. He aims to please--he listens, he's on time, trustworthy and pleasant. He installed my charger and I'd trust him with any electrical application."
"Great service expert knowledge absolutely professional."
"I had a great experience with Solid Ground Electt. I would definitely recommend them, If you have need of electrical work."
"Outstanding experience with Matt on the repair and replacement of exhaust fan and heater in an older home - responsive, dependable, reasonable, good advice, thorough, neat, quick, personable, and clear communication as to cost without red tape, exclusions and extras. A+"
"They were prompt and courteous. They identified the issue and made the repairs. We have used them a couple times for our commercial property and have been pleased with the results."
"Used Solid Ground Electrical many times and have had great service and communication throughout the process."
"I've worked with Matt and his team at Solid Ground Electric a few times over the past 2 years. They have always been great to work with. Very clear communication before, during and after a project has been completed. I would highly recommend Solid Ground Electric and will not hesitate to use them for any upcoming projects we have. Great Company!"
"Matt and his team at Solid Ground Electric have been wonderful to work with. They met critical deadlines and worked with us in a tough scheduling environment. Their work was done professionally and with great care. We will not hesitate to work with Solid Ground again."
"Matt with Solid Ground Electric is the best! We have worked with him on several occasions, and he even took on a botched job from another electrician, not only fixing it but also making a few suggestions to improve it. Highly, highly recommended!"
"I chose Solid Ground Electric because my son, who is in the trades, recommended them. Matt helped me choose a level 2 car charger and installed it. He did a beautiful job and I absolutely trust his skill and knowledge. I'm happy to give solid Ground Electric a five star review."
"I had the pleasure of working with Solid Ground Electric. They produced a high-quality product in a very professional manner. I was especially impressed with the security and special wiring tasks that were completed with care. Thank you Matt."
"Matt and his team are amazing. Jobs small and large he has got you covered."
Schedule industrial field listing now to stay organized, reduce risk, and avoid costly compliance issues.